Catalog NewsArticlesDealersDeliveryServiceJobPartnership
Enerpred

HARS-30

Set of equipment for carrying out rescue and recovery operations, lifting, handling, alignment and installation on rails and carriages units of rolling stock trains.

Key characteristics:
Hydraulic set of light alloys : AVSO 30
Pressure: 300 bar
Models
Accessories
Model with your options
Important information
Model Characteristic
АВСО-30 .
Model
АВСО-30
Characteristic
.
Model АВСО-30 Characteristic .
NBR30-7А40-1 Hydraulic station with petrol motor, unloading crane, tank 40 L, 7 L/min (control by 4 jacks from panel PU-4)
NBR30-7А40-1BU4 Hydraulic station with petrol motor, 4-channel control unit, tank 40 L, 7 L/min (control by 4 jacks)
NBR30-3,6А20-1BU2 Hydraulic station with petrol motor and 2-channel control unit, tank 20 L, 3,6 L/min (control by 2 jacks)
NBR30-11А63-1 Hydraulic station with petrol motor, unloading crane, tank 63 L, 11 L/min (control by 4 jacks from panel PU-4)
NER30–5,7А40Т1 Hydraulic station with electric motor, unloading crane, tank 40 L, 5,7 L/min, 380 V (control by 4 jacks from panel PU-4)
NER30–5,7А40Т1BU4 Hydraulic station with electric motor, 4-channel control unit, tank 40 L, 5,7 L/min, 380 V (control by 4 jacks)
NER30–3,6А20T1BU2 Hydraulic station with electric motor, 2-channel control unit, tank 20 L, 3,6 L/min, 380 V (control by 2 jacks)
NDR30-11А63-1 Hydraulic station with diesel motor, unloading crane, tank 63 L, 11 L/min (control by 4 jacks from panel PU-4)
NRG30200R Manual hydraulic emergency pump, manual control valve, tank 20 L (control by 1 jack)
NRG30200R2 Manual hydraulic pump, two manual control valves, tank 20 L (control by 2 jacks)
NRG30200R3 Manual hydraulic pump, three manual control valves, tank 20 L (control by 3 jacks)
PU-4 4-channel control panel, 4 manual 3-position control valves (control by 4 jacks)
DTA40/20G230-250 Aluminum telescopic jack, double-acting (40/20 tons, height 250 mm, stroke 230 mm)
DTA40/20G500-420 Aluminum telescopic jack, double-acting (40/20 tons, height 420 mm, stroke 500 mm)
DTA40/20G640-470 Aluminum telescopic jack, double-acting (40/20 tons, height 470 mm, stroke 640 mm)
DGA60G110-250 Aluminum load-lifting jack, double-acting (60 tons, height 250 mm, stroke 110 mm)
DTA60/30G215-250 Aluminum telescopic jack, double-acting (60/30 tons, height 250 mm, stroke 215 mm)
DGA60G250-420 Aluminum load-lifting jack, double-acting (60 tons, height 420 mm, stroke 250 mm)
DTA60/30G500-420 Aluminum telescopic jack, double-acting (60/30 tons, height 420 mm, stroke 500 mm)
DTA60/30G565-450 Aluminum telescopic jack, double-acting (60/30 tons, height 450 mm, stroke 565 mm)
DGA120G50-160 Aluminum load-lifting jack, double-acting (120 tons, height 160 mm, stroke 50 mm)
DGA120G90-250 Aluminum load-lifting jack, double-acting (120 tons, height 250 mm, stroke 90 mm)
DTA120/60G180-250 Aluminum telescopic jack, double-acting (120/60 tons, height 250 mm, stroke 180 mm)
DGA120G120-315 Aluminum load-lifting jack, double-acting (120 tons, height 315 mm, stroke 120 mm)
DGA120G250-420 Aluminum load-lifting jack, double-acting (120 tons, height 420 mm, stroke 250 mm)
DTA120/60G500-420 Aluminum telescopic jack, double-acting (120/60 tons, height 420 mm, stroke 500 mm)
DTA120/60/30G700-420 Aluminum telescopic jack, double-acting (120/60/30 tons, height 420 mm, stroke 700 mm)
DGA35G825-1030K Aluminum load-lifting jack, double-acting 35t-825 mm (with low pickup, height 1030 mm)
KN40-2 Set of tips, 40 tons, stroke is increased by 360 mm (to DTA40/20G230-250)
KN60-2 Set of tips, 60 tons, stroke is increased by 320 mm (to DTA60/30G215-250 and DGA60G110-250)
KN120-1 Set of tips, 120 tons, stroke is increased by 100 mm (to DGA120G50-160)
KN120-2 Set of tips, 120 tons, stroke is increased by 260 mm (to DTA120/60G180-250 and DGA120G90-250)
KN120-3 Set of tips, 120 tons, stroke is increased by 380 mm (to DGA120G120-315)
2HPH30-10000 High pressure hoses, length 10000 mm, with half-couplings BRSN003 (paired set), 30 MPa
2HPH30-5000 High pressure hoses, length 5000 mm, with half-couplings BRSN003 and BRSD003 (paired set), 30 MPa
2HPH30-10000BRS4 High pressure hoses, length 10000 mm, with half-couplings BRSN004 (paired set), 30 MPa (compatible with equipment Hegenscheidt MFD)
2HPH30-5000BRS4 High pressure hoses, length 5000 mm, with half-couplings BRSN004 and BRSD004 (paired set), 30 MPa (compatible with equipment Hegenscheidt MFD)
NDR50-6А40-2 Hydraulic station with diesel motor, unloading crane, tank 40 L, 6 L/min
PU50-6 Control panel PU50-6, 6-channel control unit ( 4 lifting + 2 moving)
DTA110G185 Aluminum telescopic jack, double-acting (110/50 tons, height 234 mm, total stroke 185 mm)
DTA110G400 Aluminum telescopic jack DTA120G400, double-acting (110/60 tons, height 400 mm, total stroke 400 mm)
OPDA110 Aluminum support of jack, for jacks DTA110G185 and DTA110G400
KN110-1 Set of tips, 110 tons for jack DTA110G185, stroke is increased by 260 mm
KN110-2 Set of tips, 110 tons for jack DTA110G400, stroke is increased by 360 mm
DTA170G500 Aluminum telescopic jack, double-acting, 170/70 tons, height 450 mm, total stroke 500 mm
OPDA170 Aluminum support of jack, for jack DTA170G500
KN170 Set of tips, 170 tons, for jack DTA170G500, stroke is increased by 500 mm
DGA130G115 Aluminum jack, double-acting (130 tons, height 272 mm, stroke 115 mm)
KN130 Set of tips, 130 tons, for jack DGA130G115, stroke is increased by 495 mm
М140-1100 Bridge beam, 100 tons, H= 140 mm, L= 1100 mm
М140-2200 Bridge beam, 100 tons, H= 140 mm, L= 2200 mm
М184-1100 Bridge beam, 120 tons, H= 184 mm, L= 1100 mm
М184-2200 Bridge beam, 120 tons, H= 184 mm, L= 2200 mm
NMB-140 Set of plates for М140 bridge beams connection
NMB-184 Set of plates for М184 bridge beams connection
TsP15G320FG Aluminum moving cylinder, double-acting, with hydraulic fixing device, 15 t, stroke 320 mm, remote movement of roller carriage
TsP34G320FG Aluminum moving cylinder, double-acting with hydraulic fixing device, 34 tons, stroke 320 mm, remote movement of roller carriage
RTТ75 Roller carriage with movable support, 75 tons
RT100 Roller carriage with movable support, 100 tons
RB-3 Hold-down beam, L=1030-1830 mm for connection of 2 roller carriages RT75 or RT100
RB-4 Hold-down beam, L=1500-2800 mm for connection of 2 roller carriages RT75 or RT100
TKP50 Pushing system of wheel set, 10 tons, without hydraulic cylinder
DGA10P160 Aluminum load-lifting jack, single-acting DGA10P160, (10 tons, stroke 160 mm), for pushing system of wheel set
PD10 Support of DGA10P160 jack piston, 10 tons, for pushing system of wheel set
HPH50-10000PG High pressure hose, length 10 m, with quick-release half-couplings, 50 MPa, for connection of control panel with hydraulic station
2HPH50-10000PD High pressure hoses (paired set), length 10 m, with quick-release half-couplings, 50 MPa, for connection of control panel with lifting jacks, colour: red/red
2HPH50-10000PTs High pressure hoses (paired set), length 10 m, with quick-release half-couplings, 50 MPa, for connection of control panel with moving cylinder, colour: red/red
HPH50-10000PF High pressure hose, length 10 m, with quick-release half-couplings, 50 MPa, for connection of control panel with moving cylinder fixing device, colour: black
2HPH50-10000PD High pressure hoses (paired set), length 10 m, with quick-release half-couplings, 50 MPa, for connection of control panel with lifting jacks, colour: red/red
2HPH50-10000PTs High pressure hoses (paired set), length 10 m, with quick-release half-couplings, 50 MPa, for connection of control panel with moving cylinder, colour: yellow/yellow
HPH50-10000PF High pressure hose, length 10 m, with quick-release half-couplings, 50 MPa, for connection of control panel with moving cylinder fixing device, colour: black
BR005 Quick-release half-coupling socket, 50 MPa
BN005 Quick-release half-coupling nipple, 50 MPa
BM005 Quick-release half-coupling (socket+ nipple), 50 MPa

Pumping stations for AVSO-30

Jacks for AVSO-30

Travel cylinder for АВСО-30

Specify the appropriate parameters
Comment to the order
Сontact details

The content of this publication is subject to copyright of JSC TD ENERPRED and cannot be reproduced (even in part) without appropriate permission. JSC TD "ENERPRED" reserves the right to make any changes to the design and characteristics of the tool offered in this catalog without prior notice. Instrument specifications, including weight, dimensions and other parameters, may vary slightly.

We successfully cooperate

We have much to be proud of, because of our
partners leading companies in Russia and Eastern Europe:

Order a call

Our contacts

Irkutsk

address

Rosa Luxemburg street, 184,post office box 129
Irkutsk, 664040, Russia

Phone

+7 (3952) 211-140

Fax

+7 (3952) 555-159

Email for orders

zakaz@enerpred.com

Email

info@enerpred.com

Contact with manager

Select your region

priceRequest