Catalog NewsArticlesDealersDeliveryServiceJobPartnership
Enerpred

Hydraulic crimping presses

  • Presses are designed for end bits, sleeves, and various tension, connecting, tap-off and flat clamps during installation of wires and cables of transmission lines and outdoor switchgears.
  • Models PNA are self-contained and have built-in pump;
  • Models PN are designed to operate from an external source of pressure (700 Bar);
  • Presses PN50M, PN100 are equipped with a safety valve that protects against overloads.
Models
Model with your options
Drawing
Model Capacityt Cross-sectionmm² Crimping
type
Round
dies
mm
Aluminium
muffs
(series
A)
mm
Steel
muffs
(series
B)
mm
Strokemm Working
oil
capacity
cm³
Dimensions
(BxLxH)
mm
Weightkg Effort
on
handle
kg
Recommended
pump
PNA07120 7 16-120 dotted - - - 25 100 90×650×145 7,6 20 built-in
PN07120 7 16-120 dotted - - - 25 100 70×250×90 3,2 - NRG-7004А
PNA12300 12 16-300 dotted - - - 25 150 106×650×176 8,8 20 built-in
PN12300 12 16-300 dotted - - - 25 150 73×260×100 3,9 - NRG-7004А
PN50M 56 16-500 hexagonal, round 13,8-50 18-56 15-31,5 35 275 161×264×349 18,9 - NRG-7020R
PN100 100 50-700 hexagonal, round 13,8-65 18-67 15-66 30 462 184×307×330 36 - NRG-7020R
PN200 202 64/500 hexagonal, round 44,2-50,2 to 100 to 50 50 1417 380×341×608 210 - NRG-7020R, NER-1,6I10T1, NBR-1,2I8-1
Capacityt Cross-sectionmm² Crimping
type
Round
dies
mm
7 16-120 dotted -
7 16-120 dotted -
12 16-300 dotted -
12 16-300 dotted -
56 16-500 hexagonal, round 13,8-50
100 50-700 hexagonal, round 13,8-65
202 64/500 hexagonal, round 44,2-50,2
Aluminium
muffs
(series
A)
mm
Steel
muffs
(series
B)
mm
Strokemm Working
oil
capacity
cm³
- - 25 100
- - 25 100
- - 25 150
- - 25 150
18-56 15-31,5 35 275
18-67 15-66 30 462
to 100 to 50 50 1417
Dimensions
(BxLxH)
mm
Weightkg Effort
on
handle
kg
Recommended
pump
90×650×145 7,6 20 built-in
70×250×90 3,2 - NRG-7004А
106×650×176 8,8 20 built-in
73×260×100 3,9 - NRG-7004А
161×264×349 18,9 - NRG-7020R
184×307×330 36 - NRG-7020R
380×341×608 210 - NRG-7020R, NER-1,6I10T1, NBR-1,2I8-1
Model PNA07120 Capacityt 7 Cross-sectionmm² 16-120 Crimping
type
dotted Round
dies
mm
- Aluminium
muffs
(series
A)
mm
- Steel
muffs
(series
B)
mm
- Strokemm 25 Working
oil
capacity
cm³
100 Dimensions
(BxLxH)
mm
90×650×145 Weightkg 7,6 Effort
on
handle
kg
20 Recommended
pump
built-in
Model PN07120 Capacityt 7 Cross-sectionmm² 16-120 Crimping
type
dotted Round
dies
mm
- Aluminium
muffs
(series
A)
mm
- Steel
muffs
(series
B)
mm
- Strokemm 25 Working
oil
capacity
cm³
100 Dimensions
(BxLxH)
mm
70×250×90 Weightkg 3,2 Effort
on
handle
kg
- Recommended
pump
NRG-7004А
Model PNA12300 Capacityt 12 Cross-sectionmm² 16-300 Crimping
type
dotted Round
dies
mm
- Aluminium
muffs
(series
A)
mm
- Steel
muffs
(series
B)
mm
- Strokemm 25 Working
oil
capacity
cm³
150 Dimensions
(BxLxH)
mm
106×650×176 Weightkg 8,8 Effort
on
handle
kg
20 Recommended
pump
built-in
Model PN12300 Capacityt 12 Cross-sectionmm² 16-300 Crimping
type
dotted Round
dies
mm
- Aluminium
muffs
(series
A)
mm
- Steel
muffs
(series
B)
mm
- Strokemm 25 Working
oil
capacity
cm³
150 Dimensions
(BxLxH)
mm
73×260×100 Weightkg 3,9 Effort
on
handle
kg
- Recommended
pump
NRG-7004А
Model PN50M Capacityt 56 Cross-sectionmm² 16-500 Crimping
type
hexagonal, round Round
dies
mm
13,8-50 Aluminium
muffs
(series
A)
mm
18-56 Steel
muffs
(series
B)
mm
15-31,5 Strokemm 35 Working
oil
capacity
cm³
275 Dimensions
(BxLxH)
mm
161×264×349 Weightkg 18,9 Effort
on
handle
kg
- Recommended
pump
NRG-7020R
Model PN100 Capacityt 100 Cross-sectionmm² 50-700 Crimping
type
hexagonal, round Round
dies
mm
13,8-65 Aluminium
muffs
(series
A)
mm
18-67 Steel
muffs
(series
B)
mm
15-66 Strokemm 30 Working
oil
capacity
cm³
462 Dimensions
(BxLxH)
mm
184×307×330 Weightkg 36 Effort
on
handle
kg
- Recommended
pump
NRG-7020R
Model PN200 Capacityt 202 Cross-sectionmm² 64/500 Crimping
type
hexagonal, round Round
dies
mm
44,2-50,2 Aluminium
muffs
(series
A)
mm
to 100 Steel
muffs
(series
B)
mm
to 50 Strokemm 50 Working
oil
capacity
cm³
1417 Dimensions
(BxLxH)
mm
380×341×608 Weightkg 210 Effort
on
handle
kg
- Recommended
pump
NRG-7020R, NER-1,6I10T1, NBR-1,2I8-1

The company "Enerpped" for 25 years engaged in manufacturing hydraulic presses and implements them. Marking and dies sets, properties of the resulting compounds and used fittings comply with state standards and norms.

To our customers, we are pleased to offer:

  • hydraulic press for cable at an affordable price;
  • a wide range of devices;
  • expert assistance in the selection of equipment;
  • warranty on all products sold;
  • the possibility of sending orders by any transport to any place in the Russian Federation.

We make models PNA presses are self-contained units and are equipped with a built-in drive. Mo brand equipment operates from an external source of pressure (700 Bar), and the model type PN100 and PN50M use the principle of double action.

Specify the appropriate parameters
Comment to the order
Сontact details
A.P. Valdaev Директор ООО "СТРОЙМОСТ"

Thank you for the timely delivery of hydraulic equipment (hydraulic cylinders, double-sided). Thanks to your efforts. Stroymost LLC has begun work on the span of the bridge span across the r. Sheksna on the highway of federal significance A-114 Vologda - Novaya Ladoga in terms established by the State contract.

We hope for further mutually beneficial cooperation.

Reviews

We successfully cooperate

We have much to be proud of, because of our
partners leading companies in Russia and Eastern Europe:

Order a call

Our contacts

Irkutsk

Главный офис

address

Rosa Luxemburg street, 184,post office box 129
Irkutsk, 664040, Russia

Phone

(3952) 211-140

Fax

(3952) 555-159

Email for orders

zakaz@enerpred.com

Email

info@enerpred.com

Moscow

Филиал

address

1-st Mitinskiy per., 15, building 1.
Moscow, 125310, Russia

Phone

(495) 280-73-58

Email

sales@enerpred.com

Contact with manager

Select your region

priceRequest